MISCELLANEOUS TOOLS   Certified Non-Conductive Hose & Heavy Duty Industrial     WIP-38-CNC PL-1235DHHFF Nominal 3/8 in. / 6.4 mm 1/2 in. / 12.7 mm Maximum OD .605 in. / 15.4 mm -- Minimum Bending Radius 2.5 in. / 64 mm -- Maximum Working Pressure 2250 psi / 155 bar 2500 psi / 172 bar Minimum Burst Pressure 9000 psi / 621 bar 9000 psi / 621 bar End Fittings 3/8 NPTM or 1/2 NPTM Consult Factory 1/2 Flush-Face Couplers Each End Die Electric Testing 75,000 Volts N/A Performance N/A 100R1 Single Steel Wire Braid   Hydraulic Cable Pullers     OP-824 OP-836 Weight 20 lbs / 4.1 kg 32 lbs / 5.2 kg Length 24 in. / 61 cm 36 in. / 91 cm Pressure 10,000 psi / 690 bar 10,000 psi / 690 bar Connection 3/8 NPT Female Swivel 3/8 NPT Female Swivel Pulling Force 8.1 tons 8.1 tons Stroke 9 in. / 23 cm 18 in. / 46 cm Double Acting Yes Yes Pulling Hook Included Included   Hydraulic Pruners     LOP Weight 9 lbs / 4.1 kg Overall Length 1 ft to 8 ft / .30 m to 2.4 m Consult Factory Pressure 1500-2000 psi / 103-138 bar Flow 3-6 gpm / 11-23 lpm Connection 3/8 NPT Female Swivel System Type (Unless Specifi ed, OC will be Supplied) OC or CC Jaw Opening 2 in. / 5 cm Wire Ropes No Copper / Aluminum / Conductor / Coax / Telecom Cable Up To 1 in. / 2.5 cm Soft Bolts No Rebar/Ground Rods/Anchors No Tree Branch Diameter Up To 2 in. / 5 cm Replacement Blade Part Numbers 1101   Underwater Hydraulic Grinders   MAG-14 Multi-Use MUG-14 Right-Angle Weight 5.5 lbs / 2.4 kg 6 lbs / 2.7 kg Length 14 in. / 36 cm 14 in. / 36 cm Pressure 2000 psi / 138 bar 2000 psi / 138 bar Flow 6-10 gpm / 23-38 lpm 6-10 gpm / 23-38 lpm Connection 3/8 NPTF 3/8 NPTF System Type OC OC Motor Integral Integral Capacity 5/8 in. -11 Arbor Clockwise 5/8 in. -11 Arbor Clockwise   Tool Storage Case Weight 25 lbs / 11.3 kg Outside Dimensions 32.5 in. long x 20.5 in. wide x 11.5 in. depth 82.5 cm long x 52 cm wide x 29 cm depth Features • Retractable Extension Handle • Heavy Duty 2 inch Urethane “quiet roll” Wheels • High-Impact Polypropylene • Customizable Foam Interior for Maximum Protection • Watertight • Unbreakable   Hydraulic Salvage Cutter SC-3000 SC-3000 Weight 15 lbs / 6.8 kg Length 20 in. / 51 cm Pressure 2000 psi / 138 bar Connection 3/8 NPT Female Swivel Cutting Force 9 tons Flow 8 gpm / 30 lpm Cutting Capacity Up To 3 in. / 7.6 cm Use Designed to cut cataltyic converter, pipes and exhaust pipes     Power Units and Pumps SC-3000 Description PE-183 P-159 PE-NUT • For Crimping Only • Single Acting • Advance Hold Return • Remote Motor Control • 1/2 hp, 110/115VAC • 50/60 Hz, AC • Single Phase • Double Acting • 2 Speed • 140 lb Reservoir Handle Effort • 152 cu in. Oil Capacity • 3/8 NPTF Port • 2 Stage • 100 psi / 6.89 bar • Electric • 5/8 hp, 10,000 rpm • 115V or 230V AC 50/60 Hz   SC-3000 G-13 E-10S08 Weight 143 lbs / 65 kg 15 lbs / 6.8 kg Length 26.5 in. / 67 cm 20 in. / 51 cm Width 20 in. / 50.8 cm 2000 psi / 138 bar Height 27.5 in. / 70 cm 3/8 NPT Female Swivel Hydraulic System OC 9 tons Pressure 8 gpm / 30.2 lpm @2000 psi / 138 bar 8 gpm / 30 lpm Relief Pressure 2150 psi / 148 bar Up To 3 in. / 7.6 cm Frame Type/Engine Briggs & Stratton Vanguard 1.2 gallon / 4.6 litre Tank 3 Wheel Mobile Configuration Gas Electric 10 hp, 220V Filtration 10 Micron Return Line Canister Type 10 Micron Return Line Canister Type Oil Cooler Air to Oil Air to Oil with Independent Fan Options Honda Engine Starter Kit Included   << Previous Page	Address 4453 W. 1730 S. BLDG G Salt Lake City, UT 84104 Phone 801-972-3910 Fax 801-973-7867 E-mail sales@prolinetools.com
ProLine Tools Copyright MMVII